Bidford-on-Avon, Warwickshire. Mon to Fri.01789 224228
TCIConstruction Get a quote

What we make › Landscape & street furniture › Copings and capstones

Landscape & street furniture · Copings and capstones

Coping and capstone moulds.

Moulds for wall copings, pier caps and capstones — straight and curved, with drips and throatings — for landscape, boundary and heritage walls.

Get a quote Back to Landscape & street furniture

Overview

Copings and capstones, in plain terms.

Close view of coping mould drip detail with flexible silicone insert
Drip and throating detail inside a coping mould

Copings protect the wall below. The drip and throating are functional, not decorative, and they're the part a mould most often gets wrong.

We form drips as elastomer details that release without breaking the arris.

What sets it apart

Four things that define this route.

01

Straight runs

Adjustable-length moulds with stop-ends.

02

Curved copings

Patterns built to your radius.

03

Pier caps

Weathered and moulded caps.

04

Drips and throatings

Cast in, not cut in.

How we build it

From pattern to released tool.

Straight copings: polyurethane in a rigid box with stop-ends. Curved copings: a pattern per radius, with segment lengths to suit handling.

Where the drip creates an undercut, we use a split or silicone detail.

Curved coping mould sections with split silicone detail for undercut release

The honest bit

What to know before you commit.

Every radius needs its own pattern. For several radii on one site, ask us about a flexible approach.

At a glance

The idea in a picture.

From sample to finished cast

  1. 01Sample, drawing or scanWhat the finish must match
  2. 02Master patternCarved, machined or taken from the original
  3. 03Liner or mouldMade in the right elastomer
  4. 04Trial castChecked with your mix
  5. 05Production castsLiner reused across the run
  6. 06Kept on fileReady for repeats

Swipe to see the whole diagram

Each job follows the same route, whether it is one keystone or a full run of wall panels.

FAQs

Questions we hear about this.

Match an existing coping?

Yes, from an offcut or profile gauge.

Twice-weathered?

Yes, any profile.

In this family

Related routes under Landscape & street furniture.

Landscape & street furnitureThe parent service overviewBollard mouldsBespoke and heritage bollardsBench and seat mouldsBench ends, seat units and seating wallsCopings and capstonesStraight, curved and pier cap tooling

Get in touch

Send us a photograph of the panel or the elevation.

One photograph tells us what surface you're chasing, and one line about the mix tells us what silicone or polyurethane will survive it.

Send an enquiry 01789 224228

Real people, a real workshop

You deal with the people who make it.

No call centre and no middlemen. When you contact TCI Construction, you speak to the team who design, build and check your mould.

  • A real Warwickshire workshopUnit 15, Waterloo Park, Bidford-on-Avon, Alcester B50 4JG.
  • Real people on the phoneCall the team on 01789 224228, Monday to Friday.
  • The same team on every jobDesign, production and aftercare come from the people you see here.
  • Part of TCI GroupFive specialist brands, one engineering team. Visit TCI Group.
The TCI workshop, with moulds on the bench mid-build.
The TCI workshop, with moulds on the bench mid-build.
The TCI design and project office.
The TCI design and project office.
  • Thomas LaneManaging Director
  • George PrestonDesign & Project Manager
  • Kelly BallingerHead of Partnerships
  • Jim AndertonProduction Manager
  • TheodoreEmployee Welfare
Meet the team